Reflective Road Marking Paint

 

 

Product name: Reflective road marking paint

Ingredients: retroreflective materials, aromatic alkanes, acrylic resin

Model: YY-B01

Color: yellow, black, white, red, green, blue (color can be adjusted as required)

Shelf life: 12 months

Origin: Humen Town, Dongguan City, Guangdong Province, China

Application scenario: asphalt pavement, asphalt pavement, cement pavement, parking lot, etc

Storage: This product belongs to Class III inflammable dangerous goods. This paint should avoid high temperature, sparks and flames, and should not contact the mouth, eyes, nose, ears, etc. of human body. When using this paint, it should ensure that there is enough circulating air around.

 

Reflective road marking paint reflects light through retroreflective materials under the illumination of light to warn drivers to pay attention to the line. It is used for the middle line of expressway and the middle line of road to make drivers know the route they need to take during the driving process and at dark nights, so as to prevent route deviation and reduce traffic accidents. Reflective paint for road markings can also be used on both sides of highways and roads. In dark nights, it can remind drivers that there are obstacles on both sides of the road to prevent vehicles from hitting them.

 

 

The reflective cold spraying paint for road marking shall be opened and stirred evenly above 5 ℃ for direct construction. It is easy to operate and naturally air dried to form a film.

 

 

1. Paint quickly in 5 seconds, do not wait!

 

2. Easy to use, ready to use when opening the cover, and can be sprayed and coated.

 

3. The reflective road marking paint is full in color, weather and sun resistant, long in color retention, and not easy to fade. After indoor laboratory tests, it will not fade for 3 years.

 

4. Waterproof, anti-skid, stain resistant and color preserving. The paint film is plump and thick, which can cover the dirt on the original ground

As shown in the figure: the soy sauce dripped is easy to clean and free from contamination and penetration once wiped clean.

 

5. Quick drying, surface drying within 15 minutes (normal spraying thickness of 40 microns), more convenient construction!

 

 

1. SGS

 

2. National Building Materials Testing, Consulting and Testing Report

Our reflective road marking paint has passed the JT/T280-2004 road marking paint standard inspection by the most authoritative building materials testing center in China. The drying time, abrasion resistance, water resistance, adhesion and solid content have all passed the tests

 

3. ISO system certification

Our company has passed the BG/T19001-2016idt ISO9001:2015 standard in establishing the quality management system certification and obtained the quality management system certification. In establishing the occupational health and safety management certification, we have combined the GB/T45001-2020idt ISO45001:2018 standard. In the environmental management certification, we have all passed the GB/T24001-2016idt ISO14001:2015 standard.

 

4. Dangerous Goods Business License

Our company has obtained the dangerous goods business license and can sell more than 60 kinds of chemical products. The reflective road marking paint we sell meets the scope of the dangerous goods business license. For customers with strict certificate requirements, our company can meet the requirements!

 

 

Our company's reflective road marking paint is divided into three packaging specifications: 1kg, 5kg and 25kg

 

Brush area:

The paint film is 40-60 microns, with smooth surface

1kg painting 3 - 5 square meters

2kg painting 6-10 square meters

5kg painting 15-20㎡

10kg painting 30-40 square meters

25kg painting 60-80 square meters

 

Type of shipping:

International express transportation:

Under 25kg (including 25kg), it is estimated that 7-15 days will be spent according to different time limits in different countries

Air transportation:

25KG-1t air transportation is estimated to take 7-15 days according to different time limits in different countries

Sea transportation:

Sea transportation of more than 1 ton is estimated to be around January according to different time limits of countries

 

Payment method: bank card payment

Shipping port: Shenzhen/Shanghai, according to customer demand

MOQ (minimum order quantity): 1kg

 

1. How to test the effect of reflective paint:

Flashlight ---- 2-3 meters away from the finished paint surface, place the flashlight at a place where the line of sight is parallel to the paint surface. The paint surface and the light source should be at least 45 to 90 degrees away from each other. The reflective effect can be tested.

Lamp ---- Driving high beam lamp, 50 meters away from the finished paint surface, with the paint surface at least at an angle of 45 to 90 degrees with the lamp source, can test the reflective effect.

 

2. The customer can order different types of products according to their needs:

YY-B01 Ordinary type (Class A)	20-50
YY-B01 Ordinary type (Class B)	50-80
YY-B01 Standard type (Class A)	100-150
YY-B01 Standard type (Class B)	150-200
YY-B01 High-strength type (Class A)	200-250
YY-B01 High-strength type (Class B)	250-350
YY-B01 Highlight type (Class A)	350-580
YY-B01 Highlight type (Class B)	600+

Is road marking paint reflective?
The road marking paint is divided into two products: ordinary road marking paint and reflective road marking paint.

Ordinary road marking paint is non reflective paint.

Reflective road marking paint is a reflective paint, because retroreflective materials are added into the road marking paint. During the painting process, the retroreflective materials will be exposed on the surface of the paint, refracting the light under the light, so as to achieve the effect of reflecting the light source, Therefore, the superior chemical reflective road marking paint can have excellent reflective light performance no matter at night or in the dark and humid environment in the daytime as long as there is light source.

 

Reflective paint for road markings is used on the slope of the underground parking lot to serve as a warning and anti-skid

 

The underground parking lot can be said to be an indispensable standard configuration in a modern city, which can effectively reduce the waste of ground parking area, and is also a good place for shopping malls to attract traffic. When there is not enough underground light, reflective paint will be used to paint the walls and columns. The advantage of this is that the reflective paint can reflect light to remind the driving vehicles to avoid and identify directions.

 

 

 

1.The difference between reflective paint and reflective film?
Reflective paint and reflective film itself is a big difference, from the point of form, one is paint, the other is paper film, also has the reflective paint image called liquid reflective film nickname. Generally speaking, the sticker is suitable for smooth and smooth surface, and paint for smooth and smooth surface, because the higher the friction coefficient of the substrate, water-based reflective paint or oil reflective paint is more closely absorbed

 

2.How to use the reflective paint?

Notes when using reflective paint:

1. Before construction, the oil stains, water dirt and dust on the substrate surface should be thoroughly removed, while keeping the working surface dry.

2. Before use, the reflective primer and top coat must be stirred evenly, and constantly stirred during the construction.

3. Must support the use of reflective primer base, after the reflective primer dry, and then spray reflective finish paint, in the cement material spray two reflective primer effect is better.

4. Spray reflective top paint, the paint film should be thin, not too thick, the thickness is about 20 microns, otherwise the effect is not good.

 

3. The advantages of reflective paint and reflective film?

There are two options for reflective warning, namely, you can use reflective paint and paste reflective film. In effect, the reverse coefficient of the reflective film is higher. However, the application scope of reflective film is limited, short life cycle, high environmental requirements, maintenance is difficult, which is determined by the material of reflective film itself. Reflective paint application range is wide, after the adsorption force is very strong, the change caused by environmental environment is relatively small, from the maintenance aspect, the repair of reflective paint will be more convenient, can be directly covered on the original basis
 

4. Why does the reflective paint reflect the light at night?

Reflective paint is mixed with reflective crystal mixed in the paint, after the light irradiation in the reflective crystal produced full reflection, can basically return the direct light from the distance to the original way, to achieve the same effect as light. But if there is no source of light, then the reflective paint has no luminous effect, because it itself does not shine
 

5. Construction technology description of reflective paint

Superior chemical reflective paint construction includes two most parts (construction steps introduction + construction tool selection)

Superior chemical reflective paint construction common technology (spraying, brush coating)

Superior chemical reflective paint construction steps:

1. Clean the construction surface; dry it.

2. spraying reflective primer (substrate is cement concrete spraying a layer of external wall latex paint; the effect will be better)

3. add reflective paint special diluent (10% -30%) stir colorful reflective paint.

4. construction technology: painting (recommended to use small area) slope 35 degrees, into "one" type to the same direction painting

5. Spraying is recommended for large area construction (20cm from surface; pressure 0.3 mpa; maximum atomization, spray 20 micron thick)

6. Dry for 15 minutes; test (after 24 hours) under light; the reflective effect is more obvious
 

6. What is the thickness of the reflective paint?

We every day dealing with reflective paint, a lot of problems think of complex, thinking of some reflective paint encountered problems to how to solve, but today suddenly thought of a very simple problem. Namely, does reflective paint construction thickness have a requirement? Just like the anti-corrosion paint to achieve the requirements of anti-corrosion life and anti-corrosion effect, will stipulate the thickness of a paint film to achieve how much appropriate, then reflective paint?

 

The thickness of the reflective paint is not so strict, after all, the reflective effect is not to rely on the thickness of the film to achieve, mainly by the inside of the reflective crystal, if the thickness of the film exceeds the general thickness of the film, but the quality of the reflective crystal is not able to meet the requirements. Of course, it is not to say that the reflective paint can not consider the coating thickness of the paint film, but not so high requirements. From the practical point of view, the paint film reaches a certain thickness, the service life will be longer, and the beauty will be better.

 

This does not mean that once to paint very thick, but in the construction, the first time can be thin coated a layer, such as reflective paint a little dry, and then fill with a layer of uniform thick reflective paint, so that the effect is better.
 

7. What are the characteristics of reflective paint?

The characteristics of the reflective paint are as follows:

1, high reflective rate, can prevent ultraviolet light wave irradiation, prevent color desalination stripping, can resist extremely strong salt spray, acid and alkali resistance, is made of high quality high-tech raw materials, can be comparable to the automobile industry paint.

2, easy to paint, durable, washable, quick dry.

3, the intensity of reflective, durable color, only one layer is enough to achieve the reflective effect, is the reflective intensity of the special coating.

4, reflective paint can be sprayed, painted, brushed, can also be soaked brush, easy to operate

 

http://www.superiorcoating.net/